Now, recycling Aerosol Cans Is As Easy As...Using Them

The Aerosolv Aerosol Can Recycling System Simplifies Aerosol Can Disposal
The Aerosolv puncturing unit threads directly to the 2” bung of any 30-gallon or 55- gallon drum. Simply place an aerosol can into the Aerosolv unit and lock the safety cap. With a press of the handle, a carbide-tipped puncture pin pierces the dome of the can. The carbide-tip is non-sparking, one of many safety features you’ll appreciate about the Aerosolv system.

Liquids, Collect Directly Into the Drum
That’s the neatest feature of the system. Residual liquids collect safely in the drum, ready for eventual transportation without further handling. And one 55-gallon drum will hold the residual liquids from 4,000 spent aerosol cans. As solid waste, the same cans would require at least forty 55-gallon lab-pack drums at a disposal cost of $12,000 or more.

Residual Propellant is Filtered of VOCs
The Combination Filter threads directly to the 3/4” bung of the drum, one of the many safety features incorporated into the system. Although not required by RCRA for aerosol can disposal, the filter addresses air quality and emissions standards.

The Result? Recyclable Steel and RCRA Compliance
After using the system, you’ve got an empty steel can with a small, smooth-edged hole. In as little as five seconds. No spills. No jagged edges. And, no compressed gas, so it’s ready for recycling with your other scrap steel.

Need information on the Aerosolv recycling system, contact us at 1-800-463-5259.

Aerosolv System: No. SPCPU03

Primary Filter: No. SPCPF05

2 stage Filter: No. SPCPF04